Drivers Aceeca USB Devices

Posted : admin On 1/22/2022

Navigate to the Drivers tab and pick the update driver option provided; Wait for Microsoft to locate an appropriate driver and hope that it will bring back your flash drive. These two methods have proven to be very effective in fixing a USB Drives not showing up in Windows 10 problem but in a few cases, they may prove ineffective. The Palm Desktop software is compatible with 64bit operating systems, but the USB hotsync drivers supplied with the Palm Desktop are 32 bit driers so a 3rd party, Aceeca has developed a 64bit USB driver that works with Palm Desktop Hotsync manager. To install it, please follow the instructions below after downloading this file. Generic Palm USB device drivers for Windows 7/8/10 by Aceeca. These drivers are 32-bit and 64-bit compatible. Allows HotSync over USB with Palm Desktop.

Drivers Aceeca Usb Devices Mac

-->Drivers Aceeca USB Devices

This article helps to fix an issue in which Windows 10 doesn't install specific drivers for USB audio devices on the first connection.

Original product version: Windows 10, version 1703
Original KB number: 4021854

Symptom

When you connect a USB audio device to a Windows 10 Version 1703-based computer the first time, the operating system detects the device but loads the standard USB audio 2.0 driver (usbaudio2.sys) instead of the specific device driver.

Cause

Drivers aceeca usb devices windows 7

This issue occurs because the USB audio 2.0 driver (usbaudio2.sys) isn't classified as a generic driver in Windows 10 Version 1703. Therefore, the system assumes that a compatible, nongeneric driver is installed for the device even though the driver is generic.

This issue also causes Windows 10 Version 1703 to postpone the search for other compatible drivers through Windows Update that typically occurs immediately after you install a new device.

Resolution

To fix this issue, use one of the following methods.

Method 1

To resolve this issue, install update 4022716.

Drivers Aceeca Usb Devices Windows 10

Method 2

If the device-specific driver is distributed through Windows Update, you can manually update the driver by using Device Manager. For more information about how to do this, see update drivers in Windows 10.

Method 3

If the device is not yet connected, first install the device-specific driver, such as by using the appropriate installer. After the device-specific driver is installed, Windows 10 will select that driver instead of the standard USB audio 2.0 driver when you first connect the device.

Note

See the device manufacturer's user guide for specific instructions about how to install the driver.

Method 4

If the driver isn't distributed through Windows Update, you can manually reinstall the driver. To do this, follow these steps:

  1. Install the device-specific driver (see Method 2).
  2. Open Device Manager.
  3. Right-click (or tap and hold) the name of the device, and then select Uninstall.
  4. Restart the computer.

When it restarts, Windows will try to reinstall the device by using the device-specific driver.